Sawmill Equipment

• Power: 50 and 100 HP electric motors (diesel also available)
• Production: up to 18 mt/min
• Capacity diameter: 15cm – 100cm
• Capacity length: up to 15mt
• Conveyors: Trough type infeed and outfeed - std. 9mt conveyors
• Operators Console: Standard
• Length: with 9mt infeed and outfeed 15mt
• Weight: Debarker center section 3,650kg

• Power: Electric, diesel or PTO
• Weight: 2,500kg
• Transport: stationary or portable
• Peels posts from 5cm to 30cm in diameter and 1.2mt to 3.6mt in length
• Production: Peel up to 2000 – 2.4mt posts in an 8 hour shift
• Discharge: bark auger and blower
• Debarker type: split cutterhead debarks, then planes surface

• Power: Electric, Diesel or PTO
• Production: Up to 12 mt/min
• Capacity Diameter: 5cm to 30cm, length 1.8mt to 7.6mt
• Weight: 5,000kg
• Length: 7.5mt infeed + outfeed will accomodate 9mt material
• Width: 3mt
• Height: 2.4mt w/blower, 2.2mt w/o blower
• Discharge Options: bark auger and blower, barn sweep
• Debarker Type: split cutterhead debarks, then planes surface
• Peels posts from 5cm to 30cm in diameter and 1.8mt to 7.6mt in length

• 48" 58" and 66"
• Capacity: 15" to 18" roundwood
• 3, 4, 6 Knives

• 20' x 17" wide to 22" wide with transition to accommodate chipper
• available in lengths from 12' to 70' (one drive, one piece) or over 70'
• 5" H beam frame, 1'4" thick pan, 3'8" thick at drive section
• Pan sides 30 degrees (standard) straight sides or other angles optional
• One piece transition incorporated into the conveyor planning
• Springs are .25" thick, double around the drive

• 36”
• DISC DIAMETER 32” / 813MM
• DISC WIDTH 2” / 50MM
• KNIFE LENGTH 6” / 152.4MM
• KNIFE CONFIURATION6X2 7/8X3/8 T /
• 152 X 73 X 9.53 MMT  
• CHIP SIZE : SET TO SUIT
• CAPACITY : UP TO AND INCLUDING 8’ X
• 16’ SCREEN 

• 42”
• DISC DIAMETER 42” /1067MM
• DISC WIDTH 3” / 75MM
• KNIFE LENGTH 6” / 152.4MM
• KNIFE CONFIURATION 6X2 7/8X3/8 T /
• 152 X 73 X 9.53 MMT  
• CHIP SIZE : SET TO SUIT
• CAPACITY : ANY LARGE SCREEN SET UP

• 58/48 RE CHIPPER : 8 POCKET
• DISC DIAMETER 58” /1473mm 
• DISC WIDTH 4” / 100mm 
• KNIFE LENGTH 14.75” / 374.6mm  
• CHIP SIZE SET TO SUIT  
• CAPACITY 10 - 15 TON/HR  
• HORZONTAL FEED 
• BOTTOM DISCHARGE 

• 10HP, 30HP and 40Hp Models
• Single "S" pipe on a swivel base
• Fan Speed 1680 - 1840 RPM
• 7 - 20 tons per hour
• Self aligning ball type pillow block bearings

• Power: 50 and 100 HP electric motors (diesel also available)
• Production: up to 18 mt/min
• Capacity diameter: 15cm – 71cm
• Capacity length: up to 12mt
• Conveyors: Trough type infeed and outfeed - std. 6mt conveyors
• Operators Console: Optional
• Length: with 6mt infeed and outfeed 12mt
• Weight: Debarker center section 3,650kg

• 48" & 58”
• Capacity: 15" to 18" roundwood
• 3, 4, 6 Knives

Morbark Australia Pty Ltd

PO Box 6492

Point Cook, Vic, 3030

Australia

Phone ::      (03) 9395 1955

Fax ::           (03) 9395 5506

Email ::         online@morbark.com.au